High-pressure and water-resistant sulfonate-polymer grease
For rolling, sliding and heavy-duty bearings: (extreme loads, vibrations, impacts, dust, very high temperatures, underwater operation, pressure washout, compressed steam, medium and slow speed)

Multipurpose - replaces complex lithium EP greases: rolling bearings, plain bearings, corners, loaded mechanisms, joints, pins, guides ...

  • Free and average turnover: Rotation rate DN = 400,000
  • Transfers extreme loads: EP = 800kG test (ASTM D2596)  (3 times higher load than EP2 lithium grease)
  • Very adhesive: does not rub and does not flow under pressure
  • Long lasting lubrication: even up to 10 times longer lubrication interval from lithium grease under extreme conditions.
  • Makes it easier to reach and extend the life of the bearings up to 3 times.
  • Guarantees best bearing protection: The innovative thickener creates up to 10 times thicker film lubrication in the bearing.
  • Resistant to oxidation and very high temperatures up to 230 ° C
  • Thermally stable: Dropping point: 300 ° C
  • Wide operating temperature range: (-30 ÷ 200) ° C
  • Chemical resistant: water, seawater, compressed steam, brine, aggressive media, diluted acids and alkalis.
  • Super stable in water: does not harden and does not dissolve.
  • Excellent corrosion protection: Emcor test: 0-0
  • Do not wash under pressure: best result: <1% by weight in a 90 ° C wash test according to ASTM D1264, Unattainable for other greases.
  • Ecological: no toxic substances
  • Easily pumping in central systems for NLGI = 2 to -30 ° C
  • Consistency class: NLGI = 2

Can 1kg x 6
Can 5kg x 4
Can 18kg
Drum 50kg
Drum 180kg
Cartridge 400g x12